Komatsu Rebuilds Its Big Dozer: D175AX-10 Adds 450 hp, Trims Fuel Use
Komatsu North America introduces the D175AX-10, a redesigned 450 hp dozer with hydrostatic steering, a new blade and up to 28% lower maintenance costs. Komatsu Rebuilds Its Big Dozer: D175AX-10 Adds 450 hp, Trims Fuel Use published on The HeavyQuip Magazine.
Komatsu North America has introduced a ground-up redesign that, the company says, delivers up to 25% more productivity and up to 15% better fuel efficiency in slot dozing than the D155AX-8
Komatsu has gone back to the drawing board on one of its large-class dozers. The D175AX-10, introduced by Komatsu North America on 9 November, redesigns the engine, powertrain, steering, blade, undercarriage and cab, with a clear target: move more material for less fuel and keep running costs down over the life of the machine.

Komatsu positions the machine for aggregates production, mining and large-scale site development, including large-acreage residential and commercial projects and data center sites. Against the D155AX-8, it claims up to 25% greater productivity and up to 15% better fuel efficiency in slot dozing. Those figures are Komatsu’s own comparisons.
A 12.7-litre engine without EGR
The heart of the machine is the Komatsu DBA127, a 12.7-litre Tier 4 Final engine rated at 450 net horsepower (336 kW), 27% more than the previous model. It uses a streamlined EGR-less layout, and it is not new to the range: Komatsu has already introduced it in the HM460-6 articulated haul truck and the WA475-11 and WA485-11 wheel loaders.
The engine is paired with a new four-speed automatic transmission with a lock-up clutch and 30 speed settings. Selectable operating modes let crews balance pushing power against fuel economy as conditions change, and Automatic Shift Mode can cut fuel consumption by up to 5% compared with manual operation.
Steering that does not steal power from the blade
The new hydrostatic steering system tackles a familiar dozer problem: losing blade load every time the machine turns. An independent steering pump balances power between steering and work equipment, and Komatsu quotes up to 17% greater steering force and up to 7% more power while turning. Pivot, power and spin turn modes cover confined work areas, while track shoe slip control and multistage speed settings help manage traction during production dozing and ripping.
The blade has been reworked as well. The 13.9 yd³ semi-U blade, fitted with high-efficiency end bits, is shaped to reduce digging resistance and improve material retention. Komatsu says the D175AX-10 delivers up to 18% greater average drawbar pull than the D155AX-8.
A cab and undercarriage built for long shifts
Inside, the cab gets an 8-inch touchscreen monitor, Palm Command Control System levers and a standard KomVision 360-degree camera system with a 10-inch display. Visibility improves by up to 45% to the front and 30% to the rear compared with the D155AX-8.
Underneath, a redesigned 8-track roller undercarriage puts more track on the ground, front oscillating idlers keep contact over uneven terrain, and a larger minor bogie oscillation angle helps cut vibration and operator fatigue. Together with the redesigned cab isolation, Komatsu says vibration can fall by up to 35%.
Service intervals that stretch
On cost of ownership, Komatsu claims that maintenance and downtime costs can drop by up to 28% over the life of the machine, thanks to the EGR-less engine and compatibility with ultra-low ash (ULA) oil. Hydraulic oil and filter intervals go from 2,000 to 6,000 hours, and engine oil and key filters from 500 to 1,000 hours. KDPF cleaning extends to up to 8,000 hours. Service points are at ground level and the cooling package sits side by side.
Robert Hussey, Product Manager at Komatsu, describes the machine as a complete reengineering rather than a refresh:
“This large-class machine builds on the proven foundation of the D155AX-8 with a complete redesign. From a new 450-horsepower engine and four-speed automatic transmission to an all-new steering system and redesigned semi-U blade, nearly every major system has been reengineered to help move more material with greater control. The result is a new generation of dozer engineered to deliver in four key areas: performance and productivity, ride comfort, operator features and lower total cost of ownership.”
The D175AX-10 is available in North America, according to Komatsu. The release gives no pricing and says nothing about other markets.
Komatsu Rebuilds Its Big Dozer: D175AX-10 Adds 450 hp, Trims Fuel Use published on The HeavyQuip Magazine.
machineryasia
