1 Worker Dies, 1 Seriously Injured When Boom Lift Hit by Train in California

The engineer saw the aerial lift near the track but couldn't stop the 38-mph train in time.

A worker died and another was seriously injured when a train hit a telescopic boom lift in California on a construction project.

The National Transportation Safety Board has released a preliminary report on the incident that occurred at about 2:30 p.m. October 23 near Palm Springs.

The two workers in the platform of a JLG 860SJ were at the main track in a position where they were “fouling the track,” a term that means they could be hit by a passing train, according to NTSB.

A RailPros employee authorized the train to enter the construction site, NTSB reports.   

“As the train approached about 38 mph, the engineer saw equipment fouling the track and initiated an emergency brake application, but the train struck the aerial man lift,” according to NTSB. “Both lift occupants were ejected and seriously injured; one later died.”

The engineer had minor cuts from broken glass and was treated at a hospital. The conductor was not injured.

The Union Pacific freight train was headed west on the tracks. The workers in the aerial lift, which has a max platform height of 86 feet and a horizontal outreach of 75 feet, were employed by Steve P. Rados Inc., a California-based heavy engineering construction company.

The NTSB says the incident remains under investigation, and the agency will “determine the probable cause and ways to prevent similar accidents.”

The investigation also includes the Federal Railroad Administration; the California Public Utilities Commission; Union Pacific Railroad; the Brotherhood of Locomotive Engineers and Trainmen; the Brotherhood of Maintenance of Way Employes; the International Association of Sheet Metal, Air, Rail and Transportation Workers - Transportation Division; Steve P. Rados; RailPros; and Harris and Associates.