Snow pushers, also referred to as box plows, are designed to move and stack large volumes of snow quickly — and without windrows — on parking lots and large commercial sites.
When looking for a pusher box for your skid steer or compact track loader, be sure to match the attachment to both the carrier machine and size of lots typically serviced. If you go too large, the attachment, and the snow it’s pushing, can overwhelm the carrier machine. It can also be cumbersome in confined or crowded areas around buildings, islands and cars.
A sectional blade or trip edge should be considered for lots with obstacles such as curbs, manhole covers and uneven pavement.
If you’re looking for a snow pusher attachment, check out Equipment World’s product roundup below.
Arctic Snow & Ice Products offers two series of its Sectional Sno-Pushers for skid steers: the CD Series for equipment weighing up to 5,000 pounds and the LD Series for machines less than 15,000 pounds.
The Sno-Pushers feature a sectional moldboard design, allowing the plow to contour the grade of any surface for cleaner passes. Each section features spring-loaded trip edges that independently trip if an unseen obstacle is encountered beneath the snow. Mechanical side wall panels lift up to 9 inches high to glide over and around curbs and other obstacles.
AR-400 hardened steel cutting edges and shoes provide a clean scrape and prevent premature wear, while polyurethane mounting blocks absorb impact to protect the pusher, carrier machine and operator.
Model
Weight
Outside Width
Height
Depth
CD6.5
974 lbs.
78.5”
26”
50”
CD8.5
1,025 lbs.
102.5”
26”
50”
LD8
1,150 lbs.
96”
32”
58”
LD10.5
1,792 lbs.
126”
32”
58”
LD13
2,050 lbs.
156”
32”
58”
LD15.5
2,456 lbs.
186”
32”
58”
Blue Diamond AttachmentsBlue Diamond Snow Pushers
Blue Diamond offers Snow Pushers in standard and heavy-duty grades.
The standard model, available in 72- and 96-inch widths, features a heavy-duty 10-gauge moldboard, 5/16-inch side plates, and bolt-on replaceable wear shoes to extend service life. A rubber cutting edge provides smooth, surface-safe performance on driveways, parking lots, and paved areas.
The heavy-duty pusher, available in 96- or 120-inch widths, comes equipped with an adjustable rubber cutting edge, bolt-on AR400 wear shoes, and a 10-gauge rolled moldboard that keeps snow live for smoother pushing and reduced horsepower demand.
It also features heavy steel side plates and wear shoes, and a reinforced vertical brace to distribute impact forces, ensuring durability and performance in demanding conditions.
Available in blade widths from 6 to 16 feet, Boss’ line of box plows are designed for quick cleanup on sensitive surfaces.
The plows are available with a rubber edge that naturally gives when it encounters obstacles or steel edge with heavy-duty trip edge springs to protect the plow and carrier machine from damage.
Articulating wing shoes keep the plow level and in constant contact with the pavement for a consistent and efficient push. Rugged support struts add strength, stability and long-term reliability.
Daniels PlowsDaniels Plows Versabox Plow
Daniels Plows’ Versabox Plow features a durable AR400 steel trip edge, designed to cut through hard-packed snow and ice. It can push and pull snow from curbs, loading docks and garage doors.
It comes with a standard adjustable skid steer quick connect and loader mount. The plows are available in 6- to 12-foot widths. Extended skis and optional rubber edges are available on request.
Erskine’s Snow Pusher is built to move large volumes of snow “up to five times faster than a conventional snow blade,” thanks to its high-volume box design.
Available in 96-inch and 120-inch models, it features a 34-inch height for clear visibility from the cab. A high-carbon bolt-on cutting edge and adjustable AR400 skid shoes provide performance in demanding snow conditions, while gusseted end plates offer added strength.
The Snow Pusher works with all major skid steer and tractor brands, connecting in seconds from the cab with no special tools or adapters required.
96” Snow Pusher
120” Snow Pusher
Operating Weight
630 lbs.
700 lbs.
Maximum Width
35.5”
35.5”
Maximum Height
34”
34”
Main Cutting Edge
½” x 8” adjustable high-carbon
½” x 8” reversible high-carbon
FisherFisher Storm Boxx Pusher Plows
Compatible with skid steers, tractors and wheel loaders, the Fisher Storm Boxx fixed wing pusher plow is designed to clear heavy snow accumulations quickly.
Its Trace Edge technology features individual 2-inch cutting edge sections made of high-carbon steel that contour to the pavement. The 84-degree attack angle provides clean scrapes and back drags.
Two vertical ribs (per 2-inch section) eliminate blade twisting and reduce stress on pusher assembly, while two reinforced horizontal tubes connect the ribs and provide torsional strength and rigidity.
The Storm Boxx is available with 30-, 36-, and 42-inch-tall pushers and in 8-, 10-, 12-, 14- and 16-foot widths.
Specification
32012-3
32808-2
32014-3
32810-2
Blade Size
8' x 30"
8' x 36"
10' x 30"
10' x 36"
Approx. Weight
2,658 lb
2,753 lb
2,895 lb
2,947 lb
Application Weight (Max Operating Weight)
8,000 lb
10,000 lb
9,000 lb
12,000 lb
Blade Width
8'
8'
10'
10'
Blade Height
30"
36"
30"
36"
Side Plate Width
36"
36"
36"
36"
Side Plate Height
30"
36"
30"
36"
Moldboard Radius
27"
27"
27"
27"
Approx. Snow Capacity
75 cu ft
108 cu ft
94 cu ft
135 cu ft
Jenkins Iron & SteelJenkins Iron & Steel Snow Pusher
Jenkins Iron & Steel says its Snow Pusher is ideal for any type of snow clearing, from a small parking lot to large-scale snow removal. The cutting edge can be carried slightly above the surface for use on gravel lots and driveways.
The attachment is constructed with a stiff square tube frame and 3/16-inch plow material. It comes with a standard ½-inch adjustable replaceable cutting edge and replaceable ¾-inch ground force moving shoes. Optional features include rubber cutting edges, a high-volume top screen and back drag.
Various skid steer loader mounts are also available for those without a universal skid steer quick attach system.
Commercial-grade deluxe models add a durable powder coat finish, a full-trip edge, free-floating side plates and an oscillating quick attach plate.
Kage InnovationKage Innovation SnowFire Xtreme Snowplow System
Kage Innovation’s unique SnowFire Xtreme two-in-one live edge snowplow system combines a live edge plow with a removable floating snow box.
Operators can windrow or backdrag with the plow for quick cleanup and then grab the Snowkage box to push the piles or windrows to relocate them or stack them – even over curbs.
The system is designed for use with equipment weighing 5,000 to 15,000 pounds. For skid steers, Kage recommends the following models:
SBKX72 – 5,000+ pounds
SBKX96 – 6,000+ pounds
SBKX108 – 6,500+ pounds
SBKX120 – 7,000+ pounds
Kage’s spring-loaded AdvantEdge cutting edge features independently floating and oscillating sections that are 18 or 24 inches wide for a clean scrape and durability. The spring-loaded shoes under the containment box ensure enough vertical travel and oscillation to keep the cutting edge on the substrate with minimal down pressure needed.
The SnowFire Xtreme offers one of the industry’s largest plow angles at up to 35 degrees, Kage says, which is critical when clearing wet, heavy snow.
Virnig’s V60 Snow Pusher, available with a rubber or steel edge, is ideal for clearing and piling fresh snow, slush and other light materials.
The pusher comes in 86- to 119-inch widths and is designed to keep the weight on the edge for consistent cleanup and less maintenance. Reversible, self-leveling AR400 skid shoes with a tapered outside edge help protect the pusher from side impacts.
On the rubber-edge variant, the free-floating frame automatically adapts to uneven ground in all directions. The steel-edged model offers four degrees of side-to-side oscillation to follow surface conditions and a trip edge to protect the operator and equipment.
machineryasia 
Arctic Snow & Ice Products
Blue Diamond Attachments
Boss
Daniels Plows
Erskine Attachments
Fisher
Jenkins Iron & Steel
Kage Innovation
Virnig Manufacturing
